And here we gooooooooo!
Code:
lshw -c network
*-network
description: Ethernet interface
product: NetLink BCM57780 Gigabit Ethernet PCIe
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:05:00.0
logical name: eth0
version: 01
serial: c8:cb:b8:16:71:4e
size: 100Mbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.129d duplex=full firmware=sb ip=172.17.244.189 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s
resources: irq:68 memory:febf0000-febfffff
*-network:0 DISABLED
description: Ethernet interface
physical id: 1
logical name: dummy0
serial: f6:1a:21:a2:6f:72
capabilities: ethernet physical
configuration: broadcast=yes
*-network:1 DISABLED
description: Ethernet interface
physical id: 2
logical name: ipeak0
serial: c8:cb:b8:16:71:4e
capabilities: ethernet physical
configuration: broadcast=yes multicast=yes
*-network:2 DISABLED
description: Ethernet interface
physical id: 3
logical name: ipeak1
serial: 02:01:02:03:04:05
capabilities: ethernet physical
configuration: broadcast=yes multicast=yes
Code:
apt-get install firmware-realtek
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package firmware-realtek
Looks like the wrong repo's are setup.