Computer stuff - Teh Forum

HardwareComputer stuff

From:	milko	18 Jan 15:05
To:	william (WILLIAMA)	4 of 22

43007.4 In reply to 43007.3
Every creative or PDF app has its own printer settings, which sit on top of the manufacturer ones which sit on top of the Windows ones but me phrasing it that way implied a clearer hierarchy than anything can actually tell you for sure. I had one of those subscription inkjet things from HP, which was sort of fine in a "this is probably a rip-off even at the lowest price level" until one day it flashed lights instead of printing. Support amounted to "if you pay £50 we will have a technical support conversation with you" that I had strong suspicions would involve turning it off, on and then deciding it was dead. That's "boycott manufacturer" level to me. So I got an Epson and no subscription and it was fine but the ink is insanely expensive and it complains if you use 3rd party ink but I have at least finally got it to accept and print with it. But even printing (not printing! 3 failed 3rd party cartridges in a row) black text greyscale-mode test prints was running down the YMK cartridges! Then it wouldn't print anything at all until they got replaced as well! God I want to take a hammer to it again now just from reliving this. I'll probably go laser next time, if we ever want to print in colour we'll take it to a shop or school or something. That's what I almost did this time as well.

0/0

More

From:	william (WILLIAMA)	18 Jan 23:48
To:	milko	5 of 22

43007.5 In reply to 43007.4
The mire of my own IT failures gets deeper. Got my new Plex machine up and working (as a PC, not as a Plex machine just yet) and was pleased to see how Windows 10 happily switched hardware which isn't what I like to do, but it was just a test. Then Microsoft stepped in. You can reactivate through the MS site following a major hardware change. At first it presented a dialog to sign into an MS account from where you pick your MS account linked machine to reactivate. If the machine's not listed eg because you have another MS account and pcked the wrong one (like I did) thn it's a case of trying again. Except the MS activation server went down. MS recommended a restart, only when I did, they had changed the actual PC login from a choice between PIN and local password to PIN and MS account. The wrong one. So I had to switch my account settings back to what they were, just to allow me to log in to the right MS account to reactivate. Then my boot drive began to fail. I've also been printing. He May Be Your Dog But He's Wearing My Collar

0/0

More

From:	CHYRON (DSMITHHFX)	22 Jan 11:07
To:	william (WILLIAMA)	6 of 22

43007.6 In reply to 43007.5
These aren't your IT failures, they are IT failures, full stop. IT as a totality is a spectacular, catastrophic, epic fail that we are completely unequipped to even cope with, let alone 'fix'. Anyway, it has provided a bit of amusement. So there's that. "Many Old, Distant Galaxies Look Like Surfboards"

0/0

More

From:	william (WILLIAMA)	22 Jan 16:21
To:	CHYRON (DSMITHHFX)	7 of 22

43007.7 In reply to 43007.6
Indeed, point taken. Actually, it's all working now with the one exception that Windows won't activate, and I'm not completely sure whether I'm entitled to activation or meant to buy a new license. In the old days, you upgraded your computer either by choice or because of some parts failure and tried your license again. If it didn't work you phoned some poor sod in a call centre who took your story and (99% guaranteed) would generate a new number for you. Now Microsoft have improved things. If your computer is associated with an MS account, you can simply use the activation troubleshooter, pick your device off the list and Bob's your Mum's brother. Except when it isn't listed. If I log into my MS account through a browser, there's my PC listed as one of the devices associated with my account. I think it's pukkah too: a Windows 7 device, full retail license, upgraded legitimately to Windows 10. However, if I go via the activation troubleshooter, it isn't listed. All my other devices are there, including some that don't exists anymore. So my next step is MS support. After the usual attempt to fob me off with totally unrelated web-articles and topics, I'm waiting for a call-back. No idea when. If it ever comes, and I won't be amazed if it doesn't, it will probably be while I'm in bed, or out walking with no access to pen, paper, or PC. I suppose I don't actually need a license. I'll still get updates, it will still work fine as a Plex and backup server. And as I run it headless nearly all the time, I don't care about nags either. He May Be Your Dog But He's Wearing My Collar

0/0

More

From:	CHYRON (DSMITHHFX)	22 Jan 17:53
To:	william (WILLIAMA)	8 of 22

43007.8 In reply to 43007.7
If you need a cheap license, https://www.kinguin.net/c/15019/windows worked for me last month for Win10. "Many Old, Distant Galaxies Look Like Surfboards"

0/0

More

From:	william (WILLIAMA)	22 Jan 22:46
To:	CHYRON (DSMITHHFX)	9 of 22

43007.9 In reply to 43007.8
Thanks. I've actually got a spare license I bought for something else that never materialised, so I may use that to keep things tidy. Having had no call back yet, I went on a google road trip to find out. The fastest I found was an hour. The slowest (apart from never) was 7 weeks. There's no contact route other than general phone numbers for your region. And that's for "free" support. Came across people shelling out £500 for one-off support requests and then... nothing, nada, for days, weeks. He May Be Your Dog But He's Wearing My Collar

0/0

More

From:	CHYRON (DSMITHHFX)	22 Jan 23:39
To:	william (WILLIAMA)	10 of 22

43007.10 In reply to 43007.9
Ugh. I can't imagine paying for it. "Many Old, Distant Galaxies Look Like Surfboards"

0/0

More

From:	william (WILLIAMA)	23 Jan 17:14
To:	CHYRON (DSMITHHFX)	11 of 22

43007.11 In reply to 43007.10
You get what you pay for - or in this instance a little less. I'm fairly certain that according to the detail of the MS licensing arrangements I can make major changes to my PC and still reactivate it. It gets tricky in two areas. 1) the digital license from accepting a free update from Win 7 and later to Win 10 is not transferable. So if you do make changes, it's the story of the broom with two new brushes and one new handle. It seems there's an internal policy. Change your motherboard etc once. That's OK. Do it twice and you'll probably have to go through the phone route. This may explain why my PC isn't listed on the activation server, but is listed on my MS account. (I swapped in an identical ancient mobo a year or so back and it reactivated fine). The internal policy apparently is that after 5 hardware changes, major or otherwise, they'e going to start muttering, and may well argue that you're doing a transfer. 2) The other tricky area is that at the level of MS support I'm likely to encounter, I probably know as much in most areas, and more in others than they do., and it's very likely that I'll get refused a reactivation on the grounds that the provided method doesn't work, so I must be wrong. Anyhoo, I can't be arsed with all this so I'm going to update from Win 10 home to Win 11 pro as there are some extra bits I'd like to play with. He May Be Your Dog But He's Wearing My Collar

0/0

More

From:	william (WILLIAMA)	24 Jan 11:17
To:	william (WILLIAMA)	12 of 22

43007.12 In reply to 43007.11
Upgrade to 10 pro took under 5 minutes, now downloading 11 pro (still a free update). 12 is on the horizon. Wonder if that will be a free update. He May Be Your Dog But He's Wearing My Collar

0/0

More

From:	CHYRON (DSMITHHFX)	24 Jan 12:28
To:	william (WILLIAMA)	13 of 22

43007.13 In reply to 43007.12
Pretty sure most users get Windows through single-use disposable computers (tossed when the slightest problem or perception of slowness manifests). Buying retail copies is where it can get expensive, unless you go to the dodgy dealers. "Many Old, Distant Galaxies Look Like Surfboards"

0/0

More

From:	william (WILLIAMA)	24 Jan 18:29
To:	CHYRON (DSMITHHFX)	14 of 22

43007.14 In reply to 43007.13
Here's a bit of fun. Couldn't install Windows 11 because my system disk is MBR and not GPT. So I tried a partition manager, AOMIE, to convert it. System now unbootable. Anyway, I've got backups of all I need so I thought, clean install time since it's what I should have done anyway. So I stick in a Windows 10 installation USB stick and boot from it. Lo and behold, my Windows 10 pro starts instead of the installer. It's like it's using the USB bootmgr to get to start Windows on the C Drive. In fact that's all it does. It refuses to go to the installer menu. So I wipe the boot disk. Does this help? Not really. It still tries to load - something. Anything but the installer. Eventually when I elect to "use another operating system" I get to the installer. Will it work? No. It looks like I have to pull all the drives except the target. Tomorrow. He May Be Your Dog But He's Wearing My Collar

0/0

More

From:	william (WILLIAMA)	25 Jan 11:52
To:	CHYRON (DSMITHHFX)	15 of 22

43007.15 In reply to 43007.14
Looks like the problem was the partition manager (AOMIE). Not sure how it fucked the drive, but at least one thing it did was to leave it set to MBR, which in my view is below the minimum requirement for a partition manager's "convert to GPT" function. He May Be Your Dog But He's Wearing My Collar

0/0

More

From:	CHYRON (DSMITHHFX)	25 Jan 15:35
To:	william (WILLIAMA)	16 of 22

43007.16 In reply to 43007.14
Yeah the GPT/MBR thing is a Win 11 deal-breaker for me, also the TCM thingy, which I haven't activated on my ~5-yo motherboard because multiboot hassles. Everything I read about 'converting' a drive from MBR to GPT indicated the drive would be effectively wiped. I accidentally formatted a pair of drives for a RAID 0 to GPT, which seems to work ok, but fdisk complains every time that the "primary GPT table is corrupt, but the backup appears OK, so that will be used." After some googling about it, I concluded let sleeping dogs lie. "Many Old, Distant Galaxies Look Like Surfboards"

0/0

More

From:	william (WILLIAMA)	15 Feb 10:47
To:	CHYRON (DSMITHHFX)	17 of 22

43007.17 In reply to 43007.16
Anyhoo, my main takeaway lesson, from this and the "phantom disk" thread, is to beware of false economy. I had a decent Plex server running for 3 to 4 years using >10 yo bits which was fine. However, when this started to go wrong, penny-pinching made me invest in a large number of ineffective remedies to try and rescue what I had. I now have a decent Plex server on a modern(ish) AM4 board with a Ryzen 3, 16GB of DDR4, enough disk space for the time being, and a new (very old design) Coolermaster case. This should last a while. The downside is that the ancient case design means that the cabling is a total rat's nest. Plus I have a semi-operational SATA card and no obvious way to expand. If I'd just bitten the bullet straight away, I could have bought something like the much better MSI PRO B550M-VC WiFi motherboards, which has 8 SATA ports and 2 M2 slots, all of which can be used, and a fabulous case like a Fractal Design Meshify 2. When I include things like cables, brackets, case fans (included with the Fractal Design case) etc etc , I'd probably still have change from what I spent. *Also, I wouldn't have tried to cram everything into the original case, causing a plastic tab to snap off one the SATA drive data connectors so that I now have one drive with a cable that has to stay in place and not be knocked or shaken or the drive stops working! He May Be Your Dog But He's Wearing My Collar

0/0

More

From:	ANT_THOMAS	18 Feb 08:45
To:	milko	18 of 22

43007.18 In reply to 43007.2
Go laser. Colour lasers are a reasonable price these days. Won't get away from the connection issues (though getting network printer might help), but god they're better. Toners don't dry out from infrequent printing. Just run and run. A

0/0

More

From:	william (WILLIAMA)	18 Feb 10:37
To:	ANT_THOMAS	19 of 22

43007.19 In reply to 43007.18
It's a thought. They look as though they're getting better at photo-prints as well, although from what I've seen they can be a pain to set up for this. But most of our printing is documents anyway. He May Be Your Dog But He's Wearing My Collar

0/0

More

From:	ANT_THOMAS	18 Feb 13:23
To:	william (WILLIAMA)	20 of 22

43007.20 In reply to 43007.19
I fairly recently got a "broken" Brother B&W laser printer off Facebook marketplace for free. Owner said they couldn't connect over Bluetooth/WiFi, app didn't work, cable wouldn't connect. A quick search told me it wasn't a smart printer in any way shape or form, so attempting a wireless connection was a pointless endeavour anyway. USB socket was bollocksed. Removed that and soldered an old cable directly to the PCB and it's running perfectly now. I did buy some replacement USB sockets but that would mean taking it apart again, and my bodge job with the cable is still working. So they're in a drawer waiting to never be used. A

0/0

More

From:	william (WILLIAMA)	18 Feb 22:41
To:	ANT_THOMAS	21 of 22

43007.21 In reply to 43007.20
Free is the charm as they say. I used to do the occasional soldering repair, but recently when I've tried on a couple of components I made a total bollocks of it. I don't know whether it's because I'm older and less "steady of hand" than I was, or the soldering stuff is different, or just that it's a skill you need to keep practicing. I recently accidentally buggered a 3TB HDD by snapping of the little plastic tab over the data port. Lost the tab somewhere in the mess of my desk. I took an old 120GB donor drive and cut the matching tab off. This is nearly impossible to hold over the flapping pins while pushing a cable on, but it can be inserted into the female cable and then this is wiggled over the pins to make a decent contact. The cable is then glued in place with a hot glue gun. I know that I can make a "proper" repair by swapping the whole HDD circuit board (it's only held on with screws) with a matching donor board with intact SATA connectors. With this HDD, as with most, there's a BIOS chip which has to be desoldered from the original and used to replace the donor BIOS chip. 1) my recent inability to solder, even though this is a really simple hot-air and flux job is a real blocker. 2) that people have cottoned-on to how straightforward this repair is (for all kinds of issues not just clumsy twats like me) and crappy old circuit boards are being ripped off dead disks and ebayed for silly money, doesn't help 3) but mainly the fact that my bodgy fix works, has stopped me seriously considering this. He May Be Your Dog But He's Wearing My Collar

0/0

More

From:	CHYRON (DSMITHHFX)	19 Feb 10:20
To:	ANT_THOMAS	22 of 22

43007.22 In reply to 43007.18
The profit (your cost) is in the consumables, the printers are sold below cost. "Summary: All these "influencers" are f'ed up degenerates."

0/0

More

Reply to All

Adjust text size : Smaller 10 Larger

Beehive Forum 1.5.2 | FAQ | Docs | Support | Donate!

©2002 - 2024 Project Beehive Forum

Forum Stats