If only my effort were as sophisticated...

What annoys me about products like that is the spec for the screen is rubbish. 800x480 on a 7" screen is absolutely awful. I'd expect a minimum of 1024x600, and even that's not great.

S'right. For what i need it for though, it's amply sufficient. I'm not going to be viewing photos, watching too many things (though it's nice to have the option to put some TV show on in the background while cooking), it's going to be used mainly for radio and streaming music from my NAS.

Be careful what you wish for...

Well, the one I linked to is 1024x600, but yes, most of them are terrible. The Farnell 7" screen is 800x480 and £15 more expensive.

Well, here's a cheaper case/bezel (@ £12.48), probably not quite the build quality though

I was surprised to see the screen also works with windows 7-10. Trying to think of the uses (/idle speculation) of a small touchscreen to supplement my display, which I sometimes forget is not a touchscreen.



 

That's the case I've got - unfortunately the amp and DAC I've got attached to the back come out way beyond the removable blanking plate. It's supposed to be wall mountable, but I've had to file out one of the screw mounts as the circuit boards just didn't fit (it's fine if you're just mounting the pi in it), so there's only the one mounting hole, but it's not practical to hang it off one screw somewhere in the recess cut out for it. If you were to surface mount it, there's a good 5cm that will stand off from the wall.

You can't stick the pi in a nearby cabinet and just mount the display?

That's an alternative, but I'd need an extension to the ribbon display cable that the screen uses. I'm not sure how long a length they're available in.

Huh? I thought it did hdmi?

I'll have to check, but I don't think the screen has an HDMI in...

Edit - Aye, this is from the specs as listed on pimoroni:

Connects to the Raspberry Pi board using a ribbon cable connected to the DSI port.

S'gotta be that the HDMI won't pass the touchscreen commands back to the Pi.

Ah... I dunno which screen you got, but this one sez it's treated as a usb mouse over hdmi:
 

https://www.adafruit.com/product/2260

Did you figure something out yet?

Not sure, I think the electrician's been today, so I'll update you all in this exciting saga when I get home.

No electrician today, but they have got the underfloor heating down and started the floor tiles. I've updated the folder in the previous link with some more pictures.

OK, that is blowing my mind. It looks like a freakin' Ikea showroom. I will never show this to Mrs.D!

Flat pack ftw.

  :-@  :-S :-((

Weirdly we're thining of getting one of those for the youngest nipper to give him a bit of extra space in his room.