Topaz AI stuff

From: william (WILLIAMA) 3 Mar 2021 21:08
To: william (WILLIAMA) 12 of 22
Couple of clips from the Singing Detective. I realised after I'd cut the bits out that I'd picked an area of better quality source video, but I think the difference/improvement is obvious.

Clip straight from the DVD

Clip after Topaz processing
From: ANT_THOMAS 4 Mar 2021 12:12
To: william (WILLIAMA) 13 of 22
That's actually quite interesting. I paused both at a similar frame and it was fairly impressive that her badge has gone from pretty much totally impossible to read, to maybe possible to read. Significantly clearer and sharper
From: william (WILLIAMA) 4 Mar 2021 12:55
To: ANT_THOMAS 14 of 22
I think some of the problems people have had with Topaz involve expectations. In essence each profile is just a type of filter, only with an enormously greater number of "if thens" than a standard "unsharp" or "denoise" etc. If you overdo a filter then not only do you overwrite real information with fake but cosmetically preferable information, you risk producing cosmetically undesirable results: ridiculously sharp edges where they shouldn't be, shiny, waxy, skin tones and loads of false detail. I saw an interesting blog where a photographer pushed an old landscape photo up to 4K using a Topaz photographic filter. The results were quite good, but looking closer, a road sign now had totally meaningless but clear and sharp "marks" where the words had previously been completely blurred. 

I stopped the processing at 1080P and also increased the default grain filter to add some noise back in. So Joanne Whalley's badge says "Miss C Mills Enrolled Nurse". I have a feeling that at 4K that might actually deteriorate. I'm pleased with that and will probably stop there, because it has enough clarity to look good on a big(ish) flatscreen telly. 

I have seen people online who are determined to get their ropey home-filmed VHS holiday epics up to 4K. That's quite literally true. It seems that if every single bit of the image isn't pin sharp then its unwatchable.
From: william (WILLIAMA) 5 Mar 2021 12:51
To: william (WILLIAMA) 15 of 22
Trying the same settings on the DVD box set of Porterhouse Blue. This is a truly shabby Channel 4/Acorn DVD production. It was briefly released as a 2 DVD box set with 2 episodes per disk. This is now unavailable and the present production squashes everything onto 1 disk. Unbelievably, there are a couple of "library club" editions which are even worse. I managed to find the original 2 disk release on sale in Norway.

Ensemble cast of British character actors, Tom Sharpe novel with Malcolm Bradbury screen play, great cinematography and production values for broadcast, all shat on by Acorn DVD. Clumsy mastering, shaky, noisy, and way over-compressed.

Finding that the results aren't quite so good here. Because the source is so bad, I'm getting areas that look great, clear, sharp, faces for instance, in a sea of not-so-clear detail. Which doesn't look right. May have to redo them at 720P.
From: william (WILLIAMA) 8 Mar 2021 10:21
To: william (WILLIAMA) 16 of 22
Weird user forum, by the way. Looks to be custom made, although it's fairly normal at first glance. You don't join the forum*, you gain membership by using it. Sounds reasonable but since there are no obvious instructions it's really confusing. The categories for posting are muddled up in different places and although you aren't told when you start using the forum, you can't post to it straight away. It seems that, without exception, people waste their first hours trying to find what the fuck's going on. People turn up having spent £100s on the various products and feel as though they're being treated like shit. 

I spent ages wondering what I was doing wrong because although, for some reason, I could post in a section on photographic filters (where I had nothing to say and no particular interest) the new post button for Video enhancement was (is) greyed out.

I found a bundle of posts in a general section which basically asked WTF? Somebody said they'd finally realised that they had to post stuff where they could, to be allowed to post where they actually wanted to. I (was able to) comment on this that it seemed a bizarre idea, to have to comment on stuff I had no interest in or knowledge about. This was pounced on by a "moderator" with a patronizing reply:
 
Quote: 
That is what spam control is all about. Typically spammers go away if they can’t post immediately. It may be inconvenient for you but works for the site. Just raise a post in say Topaz Products and a moderator will catch it for you.


And there's the main issue. Very enthusiastic mods. At least one, apparently, has fun deleting and editing posts he doesn't like. I've been using online forums since they were known as bulletin boards and I've never seen one quite so badly thought through.

*they use the account set up when you get a download of a product
EDITED: 8 Mar 2021 10:23 by WILLIAMA
From: Peter (BOUGHTONP) 8 Mar 2021 13:14
To: william (WILLIAMA) 17 of 22
> It may be inconvenient for you but works for the site.

I think that sums up the ethos Apple/Google/etc have brought - so much software isn't about the users any more, it boils down to being another mechanism of control.


> Weird user forum, by the way. Looks to be custom made, although it's fairly normal at first glance.
> You don't join the forum*, you gain membership by using it. Sounds reasonable but since there are
> no obvious instructions it's really confusing. The categories for posting are muddled up in different
> places and although you aren't told when you start using the forum, you can't post to it straight away

That had me thinking "I bet they're using Discourse", and I was right.

Discourse is what you get when the imbeciles behind StackOverflow think they know what they're doing, instead of realising their success there was mostly due to being less shit than Experts Exchange, and in spite off all the dumb hurdles they added, not because of them.

EDITED: 8 Mar 2021 13:38 by BOUGHTONP
From: william (WILLIAMA) 8 Mar 2021 13:47
To: Peter (BOUGHTONP) 18 of 22
You're 100% right. That's probably why there are lively active threads on "why the forum is so bad" (so long as the particular mod I mentioned allows them to continue) and so few on the software itself.



 
From: CHYRON (DSMITHHFX)11 Mar 2021 15:44
To: Peter (BOUGHTONP) 19 of 22
I suspect a lot of the activity is down to performative busywork by really bored, underemployed it hacks.
From: william (WILLIAMA)12 Mar 2021 15:48
To: CHYRON (DSMITHHFX) 20 of 22
I suspect you're right. It's not exactly a bustling hub of enthusiasm anyway. It should be, considering that Topaz products have created quite a stir in photographic and video circles in the last year, but I think the forum software is really stifling discussion. Plus, any time things kick off, the arsehole mod steps in, declares the discussion "off topic" or "not relevant" and either edits posts or cancels the thread altogether.

The video categories, in particular, are dire. It's a product that is clearly designed for high-end NVIDIA GPUs. It will run (just) on a very high-end CPU but may take multiple times longer. Yet the discussion has far too many posts along the lines of "it takes 60 hours to do 10 minutes of vid on my Matrox Mystique, what's wrong?" and "will this work on my Atom-powered notepad?"
Message 42684.21 was deleted
Message 42684.22 was deleted