1–10…31–4041–5051–6061–68

CNC me do

From: Ken (SHIELDSIT) 2 Mar 2015 19:00
To: koswix 55 of 68
41397.55 In reply to 41397.54
No, it came from a CNC milling machine of some type.  I put my finger in there to show the size of it.  It's pretty big.
Reply
0/0
From: koswix 2 Mar 2015 19:32
To: Ken (SHIELDSIT) 56 of 68
41397.56 In reply to 41397.55
I'd guess that's a Nema 23 frame, looks roughly the same size as mine.

>>I put my finger in there to show the size of it. It's pretty big.

Said the actress to the bishop.
Reply
0/0
From: graphitone 2 Mar 2015 21:39
To: Ken (SHIELDSIT) 57 of 68
41397.57 In reply to 41397.53
Looks like a hip flask made by engineers, for engineers.
Reply
0/0
From: 99% of gargoyles look like (MR_BASTARD) 2 Mar 2015 23:34
To: graphitone 58 of 68
41397.58 In reply to 41397.57
So a not-hip flask, then.
Reply
0/0
From: Ken (SHIELDSIT) 3 Mar 2015 16:05
To: koswix 59 of 68
41397.59 In reply to 41397.1
I think I've decided on a design.

You might want to check this out.  It seems pretty nice and you can download a very detailed build guide here.  This manual is on sale at Amazon and B&N for ~$30, or for free on his site, I've never seen that happen before!
Reply
0/0
From: koswix 3 Mar 2015 20:24
To: Ken (SHIELDSIT) 60 of 68
41397.60 In reply to 41397.59
That's a nice looking machine. Too big (and expensive) for me, though.
Reply
0/0
From: Ken (SHIELDSIT) 3 Mar 2015 20:33
To: koswix 61 of 68
41397.61 In reply to 41397.60
It's about the exact size I was planning on.  I have this old table that I'm going to be using.  It's 43" x 43".  In the picture I have 3 of the leafs up but you can see where they end to get an idea.
Attachments:
Reply
0/0
From: koswix 3 Mar 2015 22:38
To: Ken (SHIELDSIT) 62 of 68
41397.62 In reply to 41397.61
Looks a bit round. Also is it a central leg with feet? Wonder how stable that'll be with a big-ass machine grinding on it (possibly, john).
Reply
0/0
From: Ken (SHIELDSIT) 3 Mar 2015 23:52
To: koswix 63 of 68
41397.63 In reply to 41397.62
No it has 4 legs.  It's round because the leafs are up on 3 sides.  They fold under the table and then it's square.  The legs are 4x4 posts, if that doesn't hold the machine then I messed up and built it out of rocks.
Reply
0/0
From: CHYRON (DSMITHHFX) 4 Mar 2015 01:23
To: Ken (SHIELDSIT) 64 of 68
41397.64 In reply to 41397.63
Why did you build it out of rocks?
Reply
0/0
From: Ken (SHIELDSIT) 4 Mar 2015 01:27
To: CHYRON (DSMITHHFX) 65 of 68
41397.65 In reply to 41397.64
Reliability.
Reply
0/0
From: CHYRON (DSMITHHFX) 4 Mar 2015 02:09
To: Ken (SHIELDSIT) 66 of 68
41397.66 In reply to 41397.65
You can always count on rocks.
Reply
0/0
From: Serg (NUKKLEAR) 6 Mar 2015 18:27
To: Dan (HERMAND) 67 of 68
41397.67 In reply to 41397.31
A MIG? No wonder they were trying to put you away...  :-&
Reply
0/0
From: Serg (NUKKLEAR)23 Mar 2015 12:22
To: ALL68 of 68
41397.68
Dremel on Amazon Flash Sale. FLASH! Aah-aaaah!

http://www.amazon.co.uk/dp/B0040GJ41Q/
Reply
0/0