Reply to All
Show messages
Messages
Inbox
Search
Login
1–10
11–20
21–22
IBM System X
From: koswix
3 Feb 2020 10:25
To: Kenny J (WINGNUTKJ)
6 of 22
42546.6
In reply to
42546.4
Didn't see what colour, server lives in the loft.
The smoke from my AV receiver was acrid grey, if that's any help.
From: koswix
3 Feb 2020 10:27
To: william (WILLIAMA)
7 of 22
42546.7
In reply to
42546.5
New board on eBay is £150 T-T
I think you only need the code/license for the advanced features? The basic functionality should just work, I think.
From: william (WILLIAMA)
3 Feb 2020 10:37
To: koswix
8 of 22
42546.8
In reply to
42546.7
Hmm
£150 vs £31
Are you tempted? Pity you've just had your birthday, haven't you?
From: william (WILLIAMA)
3 Feb 2020 11:01
To: koswix
9 of 22
42546.9
In reply to
42546.7
I didn't bother digging very far because it started to remind me of work so I got all panicky and cold-sweaty and stopped, but what is the flash procedure? I saw that there's a web method (which seems a bit dumb, at least in an emergency, since the IMM controls the network).
We had a little server room at the end of the corridor with a rack of switches and some servers. There was an ancient free-standing server that had been running for years but nobody knew what it was because it wasn't on any network plans and the sticky label had dropped off. Some Network people were mucking about with re-routing some new staff workstations and one of then decided to reboot it using the big button on the front. I did suggest that plugging in the spare monitor that was standing about a foot away just to check first might be clever, but that earned me a sneer. That wouldn't restart either. turned out to be something crucial to do with Stamp Duty. Cost more than £150 on ebay to rebuild.
From: koswix
3 Feb 2020 11:30
To: william (WILLIAMA)
10 of 22
42546.10
In reply to
42546.9
The flash procedure seems to be "do it via the the web interface, if the IMM won't load, boot the backup IMM and do it via the web interface".
As far as I could see in the manual, if the backup IMM won't load either, replace the motherboard. Surely must be a header somewhere I could flash from, though?
Struggling to find any cheap replacement boxes on eBay, thankfully it's just a Plex and file storage server of little consequence to anything mission critical - glad I'm not trying to explain to the bean counters why the beans are no longer being counted.
From: CHYRON (DSMITHHFX)
3 Feb 2020 14:10
To: koswix
11 of 22
42546.11
In reply to
42546.10
No chance it's the CMOS battery?
From: koswix
3 Feb 2020 14:20
To: CHYRON (DSMITHHFX)
12 of 22
42546.12
In reply to
42546.11
¯\(°_o)/¯
Would surely still boot, just lose its BIOS settings? I've taken battery out and cleared CMOS to no effect.
EDITED: 3 Feb 2020 14:24 by KOSWIX
From: CHYRON (DSMITHHFX)
3 Feb 2020 14:53
To: koswix
13 of 22
42546.13
In reply to
42546.12
Re-seated ram, add-in cards, different psu yadda?. We're in hail-mary-pass land now... (I didn't know you could oc a psu?)
From: koswix
3 Feb 2020 14:57
To: CHYRON (DSMITHHFX)
14 of 22
42546.14
In reply to
42546.13
Tried all that (don't have bother PSU to try).
Didn't OC the PSU so much as accidentally blow up half my house due to 1950s electrics going wrong
From: CHYRON (DSMITHHFX)
3 Feb 2020 15:07
To: koswix
15 of 22
42546.15
In reply to
42546.14
I've had a pc that wouldn't post until I pulled the hdd. Then it would post, boot from a cd, and ultimately from a new hdd.