Currently yes, but I'd have to hand code it and I think I'd go insane. Next job is improving the software. A lot.
I can wait til the software is better. Can you play the theme from Project X on the Amiga?
Aha. Handy. Is 150Hz enough with them dimmed? Think it's more noticeable in a dark room too. Lots of useful libraries for the Arduino.
I'm still waiting for my two Nanos. I have a USBASP programmer which I'll use with my Pro Mini for now. Also waiting for a FTDI adapter which will be an easier connection than the USBASP. Gonna have a play with the nRF24L01 transceivers. Did you add a capacitor to the power connections on yours?
I asked on the Arduino forums about the bits in that LED controller. They are FETs and rated at 2.8A. Must be heat dissipating pads.
If you give me a midi file of it.
I will try and find one and give it to you (YJ)
I wired up my LED strip the other night using a BC547. I'm sure I had it connected right but the LEDs didn't respond to the PWM unless I swapped the transistor around the other way. Any ideas if my circuit is correct?
Different transistors definitely have different pinouts in case you looked at a generic schematic.
I got the pin layout from the eBay listing so it should be right. And I used the same ones with my clock with no problems.
I'll confess to not really knowing anything about transistors.
Not good enough :P
Turns out the eBay listing had it wrong. The tranny should be the other way round.